The method of stabilizing voltage with a voltage regulator

The method of stabilizing voltage with a voltage regulator:
1. Centralized voltage stabilization
The voltage deviation caused by non-standard 10KV distribution lines is generally solved by adjusting the transformer tap. When it is difficult to adjust the transformer tap, adding a voltage regulator can completely solve the problem.
Improper 380V/220V distribution lines, unbalanced loads, and special loads can all cause voltage deviation and fluctuations. Adding a voltage regulator is the best solution.
2. Local and nearby voltage stabilization
For voltage deviation, voltage fluctuation (grid mutation less than 10%), and voltage flicker (grid mutation greater than 10% but less than 20%), adding a voltage regulator near the electrical equipment can effectively solve the problem of grid voltage deviation. It is the most effective way to solve voltage fluctuation and improve the impact caused by voltage flicker.
3. Voltage stabilization method of isolation transformer+voltage regulator
Hybrid power supply under the mode of small capacity of power transformers, long low-voltage power supply lines, and traditional three-phase four wire power supply; Three phase voltage asymmetry and flicker problems will frequently occur (such as in remote rural areas, telecommunications base stations, etc.), and it is recommended to use an isolation transformer+voltage regulator power supply method to improve the electrical environment of electrical equipment